Frontier SE Crew Cab 4WD V6-3.3L (VG33E) (2000)
Follow all warnings and cautions provided in the Service Manual. Before disassembly: use duct tape and an "indelible" marker (permanent marker), to
mark the matching pipes and hoses, which are attached to the fuel filler neck (see Figure 12).
^
The hoses MUST be re-connected to the same pipes they were removed from.
^
If the hoses are re-connected incorrectly, refueling difficulties may occur.
4. Plug all Fuel Tank openings, except the Pressure Port (see Figure 13).
^
Use Kit A for Fuel Tanks with 3 ports (1999-2000 Frontier & Xterra)
^
Use Kit B for Fuel Tanks with 5 ports (2000-2003 Frontier & Xterra)
NOTE:
Kit A and Kit B will be automatically sent to each dealer.
5. Install the Connector Covers (from Kit #B5060-79900) onto the Fuel Sending Unit Connectors until they are fully seated (see Figure 13).
6. Remove the Fuel Sending Unit as follows:
a. First, use shop air to clean the area around the Fuel Sending Unit and Mounting Flange (see Figure 14).