Frontier SE Crew Cab 4WD V6-3.3L (VG33E) (2000)
There is a small notch above each female terminal. Probe each terminal with the "T" pin through the notch.
Do not insert any object other than the same type male terminal into female terminal.
Some connectors do not have a notch above each terminal.To probe each terminal, remove the connector retainer to make contact space for probing.
Male Terminal
Carefully probe the contact surface of each terminal using a "T" pin.
Do not bend terminal.
Probing From Harness Side
Standard type (not waterproof type) connector should be probed from harness side with "T" pin.
NOTE:
-
If the connector has a rear cover such as a ECM connector, remove the rear cover before probing the terminal.
-
Do not probe waterproof connector from harness side. Damage to the seal between wire and connector may result.
Waterproof Connector Inspection