nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Except Models Beginning With Serial # 343314|Page 11657 > < Except Models Beginning With Serial # 343314|Page 11654
Page 1
background image

Clockspring Assembly / Spiral Cable: Service and Repair
Except Models Beginning With Serial # 343314

CAUTION:
-

Before servicing SRS, turn the ignition switch OFF, disconnect both battery cables and wait at least 3 minutes.

-

Always work from the side of an air bag module.

1. Remove lower lid from steering wheel and disconnect driver air bag module connector.

2. Remove side lids. Using the TAMPER RESISTANT TORX (Size T50), remove left and right special bolts.

CAUTION:

Except Models Beginning With Serial # 343314|Page 11657 > < Except Models Beginning With Serial # 343314|Page 11654