Frontier XE Crew Cab 2WD V6-3.3L (VG33E) (2000)
Seat Belt Pre-Tensioner: Service and Repair
Removal and Installation
Except Models Beginning With Serial # 343314
CAUTION:
-
Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3 minutes.
-
Do not use old bolts and nuts after removal; replace with new ones.
-
Check seat belt pre-tensioner for proper installation.
-
After replacement of seat belt pre-tensioner, check SRS function and perform self-diagnosis for SRS. Refer to "self diagnosis" for details.
-
Do not attempt to disassemble air bag diagnosis sensor unit or seat belt pre-tensioner.
-
Replace air bag diagnosis sensor unit or seat belt pretensioner if it has been dropped or sustained an impact.
-
Do not expose seat belt pre-tensioner to temperatures exceeding 80 ° C (176 ° F).
Front Seat Belt