Frontier XE King Cab 2WD V6-3.3L (VG33E) (2001)
^
These terminals have wire seals to prevent water entry. Move the seals up the wires, away from the terminals during soldering and while the
connectors are hot. This will help prevent melting or damage to the seals.
6.
After the repairs are completed, erase the self-diagnostic results stored in the control unit by touching "ERASE" on the CONSULT screen.
7.
Check the ABS warning lamp for deactivation:
a.
Drive the vehicle over 30 km/h (19 MPH) for at least one minute.
b.
Confirm the ABS warning lamp remains "OFF".
8.
Test the ABS in a safe area to verify that it functions properly.
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line claim using the claims coding table shown.
NOTE:
Reference the Tool Catalog Price List in ASIST. Pro-rate the individual connectors, terminals, retainers and/or seals used per this list, then multiply
that pro-rated amount by 40% (dealer mark-up) to arrive at the claimable amount for the repair component(s) actually used. On your warranty claim,
use either Part Category 720 ("Engine Electrical") or 791 ("Body Electrical") depending on where the connector(s) repaired were located.