Juke AWD L4-1.6L Turbo (MR16DDT) (2011)
Cowl Moulding / Trim: Customer Interest
Body - Ticking Noise From Base Of Windshield
Classification: BT11-009
Reference: NTB11-033
Date: April 1, 2011
2011 JUKE;
TICKING NOISE FROM LOWER AREA OF WINDSHIELD
APPLIED VEHICLE: 2011 Juke (F15)
APPLIED VINs:
2WD models built after JN8AF5MR(*)BT 010602
AWD models built after JN8AF5MV(*)BT 014852
APPLIED DATE: Vehicles built after December 27, 2010
IF YOU CONFIRM
An intermittent ticking noise coming from the lower area of the windshield where the cowl top cover touches/contacts the windshield,
ACTIONS
1. Remove the cowl top cover.
2. Thoroughly clean the mating areas between the cowl top cover and the windshield (remove all dirt, sand, and debris).
3. Apply 4 strips of felt cloth tape - 2 on each end of the cowl top cover.
^ See Service Procedure for felt tape locations.
^ Use tape listed in the Parts Information.
4. Reinstall the cowl top cover.
IMPORTANT:
The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
CLAIMS INFORMATION
SERVICE PROCEDURE