Leaf ELE-Electric Engine (2011)
17. Verify "current" and "after reprogramming" part numbers are listed, then select Next.
18. Open the hood, and then connect the GR8 Multitasking Battery Diagnostic Station (battery tester/charger) to the 12 V battery.
^ For battery charger/tester setup, refer to "GR8 Multitasking Battery Diagnostic Station Setup"/Figures 34 and 35.
NOTE:
If a Mobile Technician performs the VCM reprogram, make sure a fully charged 12 V battery (with jumper cables) or portable battery charger is used.
CAUTION
Battery voltage must stay between 12 volts and 13.5 volts.
CAUTION:
Do not charge the High Voltage (HV) Lithium Ion battery during reprogramming.