Leaf ELE-Electric Engine (2011)
45. Select Close.
46. Once all DTCs have been erased:
a. Select Home.
b. Close C-III plus, turn off the CONSULT PC, and then disconnect the CONSULT PC and plus VI from the vehicle.
c. Turn "ignition" off (depress power switch once).
47. Verify the repair is complete:
a. Place the vehicle in the "READY to drive" mode (press power switch while stepping on the brake pedal).
b. Verify no error messages are displayed in the meter and gauges or center multi-function control panel.
CLAIMS INFORMATION
Install Plus VI (Plus Vehicle Interface) Firmware
Install plus VI (plus Vehicle Interface) Firmware
1. Connect the plus VI to the vehicle.
2. Connect the CONSULT PC to the plus VI with the USB cable.