nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Campaign P1213 - VCM Reprogramming|Page 37 > < Campaign P1213 - VCM Reprogramming|Page 35
Page 3
background image

CAUTION

1. First, verify C-III plus software version is either newer than 5.17, OR 5.17 and VI firmware is 3.00.68.

a. Connect the plus VI to the CONSULT PC with the USB cable, turn on the CONSULT PC, and then open C-III plus.

b. On the Home page, select Sub Mode (see Figure 1 above).

Campaign P1213 - VCM Reprogramming|Page 37 > < Campaign P1213 - VCM Reprogramming|Page 35