Maxima V6-2960cc 3.0L DOHC (VE30DE) (1992)
/Page-2040001.png)
Turn Signal Switch: Service and Repair
Combination Switch Base
It is not necessary to remove combination switch base to replace light switch.
1.
On models with airbag, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
On models less airbag, disconnect battery ground cable.
3.
On all models, remove steering wheel as outlined under STEERING SUSPENSION CHASSIS AND BODY
COMPONENTS/STEERING/COMPONENT REPLACEMENT AND REPAIR PROCEDURES/STEERING WHEEL.
4.
Remove steering column shell covers.
5.
Disconnect switch electrical connections.
6.
Remove retaining screws and switch base.
7.
Reverse procedure to install.
