Maxima V6-2960cc 3.0L SOHC MFI (VG30E) (1990)
Do not drive seal cutter into oil pump or rear oil seal retainer portion, or aluminum mating surfaces will be damaged.
Do not insert screwdriver, or oil pan flange will be deformed.
Slide Tool by tapping its side with a hammer, and remove oil pan.
Installation
1. Before installing oil pan, remove all traces of liquid gasket from mating surface using a scraper.
Also remove traces of liquid gasket from cylinder block mating surface.
2. Apply sealant to oil pump gasket and rear oil seal retainer gasket.