Maxima V6-2960cc 3.0L SOHC MFI (VG30E) (1990)
Turn Signal Switch: Service and Repair
It is not necessary to remove combination switch base to replace light switch.
1.
On models with airbag, disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
On models less airbag, disconnect battery ground cable.
3.
Remove steering column shell covers.
4.
Disconnect switch electrical connections.
Combination Switch/Replacement
5.
Remove retaining screws and switch.
6.
Reverse procedure to install.