nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Suspension > < With Supplemental Restraint System
Page 1
background image

Steering Wheel: Service and Repair
Without Supplemental Restraint System

1.

Remove two attaching screws from rear of steering wheel, then remove horn pad.

2.

Remove steering wheel using puller tool No. J25726-A or equivalent.

3.

Reverse procedure to install noting the following:
a. When installing apply suitable grease to entire surface of turn signal cancel pin and horn contact slip ring.
b. Torque steering wheel attaching nut to 22-29 ft. lbs.

Suspension > < With Supplemental Restraint System