Maxima V6-2960cc 3.0L SOHC MFI (VG30E) (1990)
Note: Too much lubricant might damage clutch facing.
Clutch Cover and Flywheel
INSPECTION AND ADJUSTMENT
-
Set Too and check height and unevenness of diaphragm spring.
Diaphragm spring height "A": 37.5 - 39.5 mm (1.476 - 1.555 in)
-
heck thrust rings for wear or damage by shaking cover assembly and listening for chattering noise or lightly hammering on rivets for a slightly
cracked noise. Replace clutch cover assembly if necessary.
-
Check pressure plate and clutch disc contact surface for slight burns or discoloration. Repair pressure plate with emery paper.
-
Check pressure plate and clutch disc contact surface for deformation or damage. Replace if necessary.
-
Adjust unevenness of diaphragm spring with Tool.
Uneven limit: 0.5 mm (0.020 in)
FLYWHEEL INSPECTION
-
Check contact surface of flywheel for slight burns or discoloration. Repair flywheel with emery paper.
-
Check flywheel runout.
Runout (Total indicator reading): Less than O.15 mm (0.0059 in)
INSTALLATION
-
Align clutch with tool when installing clutch cover and disc.