Maxima V6-3.5L (VQ35DE) (2007)
-
Reposition tool (1) near pull handle and release additional clips working toward vehicle front until trim molding (2) is fully disengaged from
front door finisher.
5. Remove front door finisher screws and release clips attaching door finisher to inner door.
6. Remove front door finisher.
7. Disconnect wire harness and remove step lamp.
8. Disconnect harness and remove trunk/fuel lid opener switch assembly.
9. Disconnect lock cable and handle cable and remove inside door handle assembly.
Installation
Installation is in the reverse order of removal.