nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Dashboard / Instrument Panel > < Body and Frame|Service and Repair
Page 1
background image

Carpet: Service and Repair

FLOOR TRIM

Exploded View EI-41

Removal and Installation

REMOVAL

1. Disconnect the negative and positive battery cables, then wait at least 3 minutes.
2. Remove lower body side trim. Refer to "BODY SIDE TRIM".
3. Remove front seats. Refer to "FRONT SEAT".
4. Remove rear seat cushion. Refer to "REAR SEAT".

-

On 4 seat model, remove seat backs.

5. Remove center console. Refer to "INSTRUMENT PANEL ASSEMBLY".
6. Remove lower seat belt anchors. Refer to "SEAT BELTS".
7. Remove service mat bracket.
8. Remove front carpet RH/LH.
9. Remove rear seat cushion hooks.

10. Remove rear carpet.

INSTALLATION

Installation is in the reverse order of removal.

Dashboard / Instrument Panel > < Body and Frame|Service and Repair