Maxima V6-3.5L (VQ35DE) (2007)
6.
Press (snap) the top and bottom of the mirror in place.
^
A "snap" can be heard when pressing each section to verify it has been fitted correctly.
7.
Use a plastic trim tool to gently lift the lower corners of the mirror to confirm that it is securely snapped into place.
^
If the mirror unsnaps when you're doing this check, go back to step 6.
NOTE:
Plastic "Trim Tool Set J-46534 (an "essential tool") is available from TECHMATE.
8.
Confirm that all door mirrors are operating correctly.
Disclaimer