Maxima V6-3.5L (VQ35DE) (2007)
Seat Bladder: Customer Interest
Interior - Driver Seat Lumbar Support Inoperative
Classification: BT07-028
Reference: NTB07-086
Date: November 21, 2007
2007-2008 MAXIMA; DRIVER SEAT LUMBAR SUPPORT REPAIR PROCEDURE
APPLIED VEHICLE:
2007 - 2008 Maxima (A34)
APPLIED VIN:
Built before 1N4BA41E(*)7C 862816
APPLIED DATE:
Built before May 18, 2007
IF YOU CONFIRM
The power lumber support on the driver seat is inoperative,
ACTION
Replace the lumber support assembly.
Do not replace the entire seat back for this incident.
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the claims coding table.
IMPORTANT:
The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
SERVICE PROCEDURE
1.
Write down the radio station presets.
2.
Move / adjust the driver seat bottom and seatback to the full forward positions.
3.
Disconnect both battery cables, negative cable first.
4.
Remove the driver seatback finisher as follows: