Maxima V6-3.5L (VQ35DE) (2007)
Parking Lamp: Initial Inspection and Diagnostic Overview
Descriptions of On-Board Diagnostics
CONSULT-II Functions
Refer to LT-19, "CONSULT-II Function (BCM)" in HEADLAMP (FOR USA). See: Headlamp/Testing and Inspection/Initial Inspection and
Diagnostic Overview/Headlamp (For USA)/Descriptions of On-Board Diagnostics/CONSULT-II Function (BCM)
Refer to LT-21, "CONSULT-II Function (IPDM E/R)" in HEADLAMP (FOR USA). See: Headlamp/Testing and Inspection/Initial Inspection and
Diagnostic Overview/Headlamp (For USA)/Descriptions of On-Board Diagnostics/CONSULT-II Function (IPDM E/R)
Diagnostic Strategies
How to Proceed With Trouble Diagnosis
1. Confirm the symptom or customer complaint.
2. Understand operation description and function description. Refer to "System Description".
3. Carry out the Preliminary Check. Refer to "Preliminary Check".
4. Check symptom and repair or replace the cause of malfunction.
5. Do the parking, license plate, rear marker and tail lamps operate normally? If YES: GO TO 6. If NO: GO TO 4.
6. Inspection End.
Preinspections
CHECK POWER SUPPLY AND GROUND CIRCUIT
Refer to BCS-15, "BCM Power Supply and Ground Circuit Check". See: Body and Frame/Body Control Systems/Testing and Inspection/Initial
Inspection and Diagnostic Overview/BCM Power Supply and Ground Circuit Check