Maxima V6-3.5L (VQ35DE) (2007)
3. Mount transmitter on rim and tighten nut to specification.
NOTE: Make sure no burrs exist in the valve stem hole of the wheel.
Transmitter nut: 5.5 Nm (0.56 kg-m, 49 in-lb)
4. Place wheel on turntable of tire machine. Ensure that transmitter is 270 degrees from mounting/dismounting head.
NOTE: Do not touch transmitter with mounting head.
5. Lubricate tire well, and install second side of tire as normal. Ensure that tire does not rotate relative to rim.
6. Inflate tire and balance the wheel and tire assembly.
7. Install wheel and tire assembly in appropriate wheel position on vehicle.
NOTE: If replacing transmitter, transmitter wake up operation must be performed. Refer to WT-19, "Transmitter Wake Up Operation". See:
Wheels and Tires/Tire Monitoring System/Testing and Inspection/Programming and Relearning/Transmitter Wake Up Operation
8. Adjust neutral position of steering angle sensor, if equipped.