Maxima V6-3.5L (VQ35DE) (2007)
Ball Joint: Specifications
Rear Suspension
SUSPENSION ARM
Ball Joint
^
Check the suspension arm for damage, cracks, deformation and replace if necessary
^
Check the rubber bushing for damage, cracks, deformation and replace if necessary.
^
Check the ball joint. Replace the suspension arm assembly if any of the following conditions exist:
-
Ball stud is worn.
-
Joint is hard to swing.
-
Check if the swinging force "A", turning force "B", or vertical end play "C" is out of specification.
NOTE: Before checking specifications, turn the ball joint at least 10 revolutions so the ball joint is properly broken in.
Swinging force A: Refer to "Ball Joint".
Turning force B: Refer to "Ball Joint".
Vertical end play C: Refer to "Ball Joint".