Maxima GLE V6-3.0L (VQ30DE) (1998)
![background image](/nissan/maxima_gle/v6-3.0l_(vq30de)/Page-1101002.png)
Crankshaft position sensor (REF)
1. Disconnect crankshaft position sensor (REF) harness connector.
2. Loosen the fixing bolt of the sensor.
3. Remove the sensor.
4. Visually check the sensor for chipping.
5. Check resistance as shown in the figure.
Resistance: Approximately 470 - 570 Ohms [At 20°C (68°F)]