Maxima GXE V6-3.0L (VQ30DE) (1999)
1.
Remove and discard all four clips (A through D) from the EGI harness (see Figure 3-1). You can cut clips C and D. Pull, but DO NOT CUT clips
A and B from their brackets.
2.
Cut away the tape and remove the star-shaped support braces from the harness (see Figure 3-2). Discard these braces.
3.
Remove the bracket for clip A from the strut tower (see Figure 4).
CAUTION : Be extremely careful not to cut into any wires within the harness.