Maxima GXE V6-3.0L (VQ30DE) (1999)
^
Using a feeler gauge, measure clearance between valve lifter and camshaft.
^
Record any valve clearance measurements which are out of specification. They will be used later to determine the required replacement
adjusting shim.
Valve clearance for checking (Cold):
Intake: 0.26 - 0.34 mm (0.010 - 0.013 inch)
Exhaust: 0.29 - 0.37 mm (0.011 - 0.015 inch)
7. Turn crankshaft 240° and align as above.
8. Set No. 3 cylinder at TDC on its compression stroke.
9. Check only those valves shown in the figure.