Maxima GXE V6-3.0L (VQ30DE) (1999)
1. Touch "IVMS COMM DIAGNOSIS" in "IVMS-COMM CHECK".
2. Touch "START".
3. If no failure is detected, inspection is end.
If any problem code is displayed, repair/replace the system according to the IVMS communication diagnosis results.
4. Erase the diagnostic results memory.
a. Turn ignition switch "ON".
b. Touch "IVMS".
c. Touch "IVMS COMM DIAGNOSIS" in "IVMS-COMM CHECK".
d. Touch "START" for "IVMS COMM DIAGNOSIS".
e. Touch "ERASE".
Without Scan Tool
On-Board Diagnosis - Mode I (IVMS Communication Diagnosis)