Maxima GXE V6-3.0L (VQ30DE) (1999)
-
After performing each TROUBLE DIAGNOSIS, perform "OVERALL FUNCTION CHECK" or "DTC (Diagnostic Trouble Code)
CONFIRMATION PROCEDURE". The DTC should not be displayed in the "DTC CONFIRMATION PROCEDURE" if the repair is completed.
The "OVERALL FUNCTION CHECK" should be a good result if the repair is completed.
-
When measuring ECM signals with a circuit tester, never bring the two tester probes into contact. Accidental contact of probes will cause a short
circuit and damage the ECM power transistor.
-
Regarding model A32, "-B1" indicates the right bank and "-B2" indicates the left bank as shown in the figure.