Maxima GXE V6-3.0L (VQ30DE) (1999)
Standard type (not waterproof type) connector should be probed from harness side with "T" pin.
^
If the connector has a rear cover such as a ECM (Engine control Module) connector, remove the rear cover before probing the terminal.
^
Do not probe waterproof connector from harness side. Damage to the seal between wire and connector may result.
Female Terminal
^
There is a small notch above each female terminal. Probe each terminal with the "T" pin through the notch.
Do not insert any object other than the same type male terminal into female terminal.
^
Some connectors do not have a notch above each terminal. To probe each terminal, remove the connector retainer to make contact space for
probing.
Male Terminal
Carefully probe the contact surface of each terminal using a "T" pin.
Do not bend terminal.
Waterproof Connector Inspection
WATERPROOF CONNECTOR INSPECTION