Maxima GXE V6-3.0L (VQ30DE) (1999)
The following Harness Layouts use a map style grid to help locate connectors on the drawings:
^
Engine Room Harness (Engine Compartment)
^
Main Harness
^
Engine Control Harness
^
Body Harness
To use the grid reference
1. Find the desired connector number on the connector list.
2. Find the grid reference.
3. On the drawing, find the crossing of the grid reference letter column and number row.
4. Find the connector number in the crossing zone.
5. Follow the line (if used) to the connector.
CONNECTOR SYMBOL
Main symbols of connector (in Harness Layout) are indicated in the diagram.
Connector and Terminal Pin Kit
Connector And Terminal Pin Kit
Use the connector and terminal pin kit listed below when replacing connectors or terminals.
The connector and terminal pin kit contains some of the most commonly used NISSAN connectors and terminals.
How to Check Enlarged Contact Spring of Terminal
An enlarged contact spring of a terminal may create intermittent signals in the circuit.
If the intermittent open circuit occurs, follow the procedure below to inspect for open wires and enlarged contact spring of female terminal.