Maxima SE V6-2968cc 3.0L DOHC MFI (VQ30DE) (1997)
Steering Gear: Initial Inspection and Diagnostic Overview
1. Check the movement of steering gear housing during stationary steering on a dry paved surface.
NOTE: Apply a force of 49 N (11 lbs.) to the steering wheel to check the gear housing movement.
2. Turn off ignition key while checking.
3. Movement of gear housing is ±2 mm (±0.08 inch) or less.
4. If movement exceeds the limit, replace mount insulator after confirming proper installation of gear housing clamps.