Maxima SE V6-2968cc 3.0L DOHC MFI (VQ30DE) (1997)
DISASSEMBLY
1. Remove valves at retainer plates. Do not use a magnetic pick-up tool.
a. Use a screwdriver to remove retainer plates.
b. Remove retainer plates while holding spring, plugs or sleeves. Remove plugs slowly to prevent internal parts from jumping out.
c. Place mating surface of valve body face down, and remove internal parts.
NOTE:
^
If a valve is hard to remove, place valve body face down and lightly tap it with a soft hammer.
^
Be careful not to drop or damage valves and sleeves.
INSPECTION