Maxima SE V6-3.0L (VQ30DE) (1998)
Console: Customer Interest
Console - Lid Loose/Disconnected
Classification:
BT98-023
Reference:
NTB98-076
Date:
September 15, 1998
1995-98 MAXIMA CONSOLE LID REPAIR
APPLIED VEHICLE:
1995-98 Maxima (A32)
APPLIED VINS:
Vehicles built before:
JN1CA21A2WT309248
JN1CA21AXXT700102
JN1CA21DXWT536147
JN1CA21D0XT800204
JN1CA21D*WM932169
JN1CA21D*WM807735
APPLIED DATE:
Vehicles built before May 13, 1998
SERVICE INFORMATION
If the console lid on an applied 1995-98 Maxima disconnects from the console box, wiggles or seems loose when opened, excessive lid opening force
may have caused one or both of the console lid stopper links to disconnect from, fall out of, or become bent in the slots in the console box.
Replacement lid stopper links are now available to correct this condition. Use the following procedure to repair this incident.
SERVICE PROCEDURE
1.
Open the console lid and remove any items inside the console box.
2.
Unscrew the console lid hinge from the console box. Slide any remaining lid stopper links out of their slots and remove the console lid (see Figure
1).
3.
To install the replacement stopper links, widen the left and right slots in the console box (which house the stopper links) by 3 mm (0.117 inches),
as follows: