Maxima SE V6-3.0L (VQ30DE) (1998)
6.
Loosen the drive belt tension adjuster (see Figure 3) and remove the drive belt from the alternator pulley.
7.
Remove the alternator wire harness support bracket bolt (see Figure 4).
8.
Disconnect the alternator wire harness (S & L terminal) connector from the alternator (see Figure 5).
9.
Disconnect the wire harness "eye-loop" terminal from the alternator "B" terminal (see Figure 5).
10.
Disconnect the wire harness from the A/C compressor.