Maxima SE V6-3.5L (VQ35) (2002)
Front Crankshaft Seal: Service and Repair
Replacement
CAUTION: When removing the oil pans, oil pump assembly and timing chain from engine, first remove the crankshaft position sensor (POS) from
the assembly. Be careful not to damage sensor edges.
FRONT OIL SEAL
1. Remove the following parts:
^
Engine undercover
^
Front RH wheel and engine side cover
^
Drive belts
^
Crankshaft pulley
Be careful not to damage sensor edge.
2. Remove front oil seal using a suitable tool. Be careful not to scratch front cover.
3. Apply engine oil to new oil seal and install it using a suitable tool.
^
Install new oil seal in the direction shown in the figure.