Maxima SE V6-3.5L (VQ35) (2002)
5.
Start ASIST, then select "INFO. Tool Box" from the main menu screen (see Figure 7).
6.
From the "INFORMATION TOOLBOX" screen, select "CONSULT Utilities" (Figure 8).
7.
From the "CONSULT Utilities" screen, select "CONSULT-li", then select "ECM Data" (see Figure 9).
8.
The "ECM Data Reprogramming" screen will be displayed (see Figure 10):
NOTE:
^
This is a special ECM reprogram and the following steps are used FOR THIS INCIDENT ONLY!
^
An ECM ID CODE must be entered to get the Reprogramming data from ASIST.