Maxima SE V6-3.5L (VQ35) (2002)
9.
Turn on CONSULT-II as follows to access the file transfer mode:
A.
While pressing on the CONSULT-II screen with your thumb, quickly depress and release the ON/OFF switch (see Figure 13).
NOTE:
A double-beep will sound after the ON/OFF switch is quickly depressed and released.
Release your thumb from the screen after a double-beep sound is heard.
B.
Select "Transfer files via Lan" (see Figure 14). Set the CONSULT-II unit down for now.
NOTE:
If you accidentally choose a menu option other than "Transfer Files via Lan", turn CONSULT-II off and restart it according to step 9A above.
10.
On ASIST, make sure the Ethernet (IP) Address (for CONSULT-II) displayed in the "Change IP Address" box is the same number you printed in
step 4E or 4H, then select "Continue".
NOTE:
If the Ethernet (IP) Address (for CONSULT-II) displayed in the "Change IP Address" box is not correct, turn CONSULT-II off and return to step 4
of this bulletin.