Maxima SE V6-3.5L (VQ35) (2002)
Fuel Gauge Sender: Service and Repair
Fuel Pump, Fuel Level Sensor Unit and Fuel Filter
REMOVAL
1. Release fuel pressure from fuel line.
Refer to "Fuel Pressure Release".
2. Remove rear seat bottom. Refer to "Removal and Installation".
3. Remove inspection hole cover located under the rear seat.
4. Disconnect electrical connector.
5. Remove the quick connectors.
-
For removal of quick connectors, refer to step 5. of "Fuel Tank Removal".
6. Remove the six screws.
7. Pull out the fuel level sensor unit and fuel pump.
-
Do not damage the arm of the fuel level sensor and fuel tank temperature sensor.