Maxima SE V6-3.5L (VQ35) (2002)
D.
Click the "Continue" button on the ECM Data Reprogramming screen (see Figure 5) to proceed to CONSULT-II setup.
Chart A - Current ECM P/N's:
Special ECM Reprogramming Procedure for ECM I.D. Entry
Perform the Download ECM Reprogramming data into CONSULT-II from ASIST procedure below.
CAUTION:
The ECM can be permanently damaged if the Reprogramming procedure is not followed exactly. Do not attempt Reprogramming it the vehicle or the
CONSULT-II batteries are low. Do not disconnect or disturb the CONSULT-II while ECM Reprogramming is in progress. If the ECM is damaged, it
must be replaced, and will not be covered by the vehicle warranty.
Download ECM Reprogramming data into CONSULT-II from ASIST Procedure
IMPORTANT!
^
This is a special ECM reprogram and the following procedure is used FOR THIS INCIDENT ONLY!
^
Step 8 of Download ECM Reprogramming data into CONSULT-II from ASIST has been changed JUST FOR THIS BULLETIN. An ECM ID
CODE must be entered to get the Reprogramming data from ASIST. This is different from the typical ECM Reprogramming procedures now in use.
The ECM ID code is listed in the right hand column of Chart A.
^
For limited application special customer concern incidents like this, the ECM ID CODE will be used. The general procedure for most other incidents
will remain as usual: Enter Model Year and Model to look up ECM data in ASIST.