Maxima SE V6-3.5L (VQ35) (2002)
MULTIPLE SWITCH
The continuity of multiple switch is described in two ways as shown below.
-
The switch chart is used in schematic diagrams.
-
The switch diagram is used in wiring diagrams.
How to Read Harness Layout
The following Harness Layouts use a map style grid to help locate connectors on the drawings:
-
Main Harness
-
Engine Room Harness (Engine Compartment)
TO USE THE GRID REFERENCE
1. Find the desired connector number on the connector list.
2. Find the grid reference.
3. On the drawing, find the crossing of the grid reference letter column and number row.
4. Find the connector number in the crossing zone.
5. Follow the line (if used) to the connector.