Maxima SE 20th V6-3.0L (VQ30DE) (2001)
If only the ECM connection is repaired, submit a primary Failed Part (PP) line claim using the claims coding table shown.
OR
If the ECM connection is repaired, the 02 sensor is replaced, and (if required) the ECM is reprogrammed, submit a Primary Failed Part (PP) line using
the claims coding table shown.
Information
You will be performing the following, as required:
^
Determine DTC's (all incident cases).
^
Repair the ECM Connector (all incident cases).
^
Replace the Front Oxygen Sensors (required for DTC P0134 or P0154 only).
^
Check and update the ECM (required for DTC P0134 or P0154 only).
^
Perform System Check (all incident cases).
List All DTC's Stored In ECM
1.
Determine which DTC code(s) are stored in the vehicle's ECM by performing CONSULT-II Self-Diagnosis.
2.
Print out the Self-Diagnosis results for use in Step 10 and Step 1. See Figure 1 for an example of the CONSULT-II Self-Diagnosis printout.
3.
Proceed to and perform Repair The ECM Connection.
Repair the ECM Connection (All Incident Cases)