nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Recall - Fuel Injectors & Hoses, EGI Harness Routing|Page 2410 > < Recall - Alternate Procedure for Checking Resistance|Page 2405
Page 1
background image

Fuel Injector Wiring Harness: All Technical Service Bulletins
Recall - Fuel Injectors & Hoses, EGI Harness Routing

Reference: NTB96-010i

Date: October 2, 1996

VOLUNTARY SERVICE CAMPAIGN - FUEL INJECTORS AND HOSES

1985-88 MAXIMA - EGI HARNESS ROUTING

This bulletin contains revised Service Procedures and is a supplement to NTB96-010a. Refer to NTB96-010a for complete campaign details.

APPLIED VEHICLE: 
1985-88 Maxima (U11)

APPLIED VIN: 
All

SERVICE INFORMATION

The EGI harness clamp attached to the passenger side strut tower may have been removed if the timing belt was replaced or if major engine work was
performed. If the clamp is in position but the EGI harness is not routed through it, the EGI harness can lay on the timing belt cover and chafe against the

Recall - Fuel Injectors & Hoses, EGI Harness Routing|Page 2410 > < Recall - Alternate Procedure for Checking Resistance|Page 2405