Maxima Wagon V6-2960cc 3.0L SOHC MFI (VG30E) (1986)
2.
Remove the right inner fenderwell splash guard.
3.
Remove the alternator pulley nut using an appropriate tool.
4.
Loosen the two bolts securing alternator and lock nuts on the belt tension adjustment. Swing the alternator forward towards the front of the car.
5.
Remove the large diameter alternator pulley (75 mm) from the alternator.
6.
Remove the two (2) bolts that secure the A/C compressor RPM sensor bracket and swing to one side.
7.
Loosen the A/C idler pulley and remove the A/C belt.
8.
Remove the alternator belt.
9.
Install the new alternator belt (P/N 11720-16E02) and original A/C belt.
10.
Install and tighten the compressor RPM sensor bracket.
11.
Install the small diameter pulley (65 mm P/N 23150-26E00, wave washer and nut. Torque the nut to 29-43 ft.lbs. (39-59 N-m, 4.0-6.0 Kg-m).
12.
Adjust alternator belt tension and tighten the alternator mounting bolts.
13.
Install the right inner fenderwell splash guard.
14.
Install the right front wheel.
WARRANTY INFORMATION
CS
PNC
CT
OP CODE
FLAT RATE
1Y
23150
99
EE99AB
0.4/hr.