Murano AWD V6-3.5L (VQ35) (2003)
![background image](/nissan/murano_awd/v6-3.5l_(vq35)/Page-2307002.png)
2. Remove bumper fascia bolts from both right/left rear fender.
3. Remove upper portion of bumper fascia clips, and remove clips of lower portion.
4. Pull out center of bumper fascia, and pull out side of bumper fascia from clips.
5. Remove bumper fascia assembly.
6. Remove rear bumper energy absorber.
7. Remove bumper reinforcement nuts and remove bumper reinforce assembly.
INSTALLATION
Install in the reverse order of removal.
REAR BUMPER CLOSING
Removal and Installation
REMOVAL
1. Remove clips of bumper closing.
2. Remove bumper closing.
INSTALLATION
Install in the reverse order of removal.
DRAFTER GUARD
Removal and Installation
REMOVAL
1. Remove nut and bolt of drafter guard.
2. Remove drafter guard assembly.
INSTALLATION
Install in the reverse order of removal.