Murano AWD V6-3.5L (VQ35) (2003)
![background image](/nissan/murano_awd/v6-3.5l_(vq35)/Page-2330001.png)
Rear Door Window Regulator: Service and Repair
REAR DOOR GLASS AND REGULATOR
Removal and Installation
REMOVAL
1. Remove the rear door finisher.
@EI-30, "DOOR FINISHER".
2. Remove the out side molding.
3. Remove the sealing screen.
4. Remove the rear lower sash.
5. Operate the power window switch to raise/lower the door window until the glass mounting bolts can be seen.
6. Remove the glass mounting bolts, and place the glass on the inner bottom of the panel.
7. Remove the power window motor mounting bolts, and remove the regulator from the panel.