Murano AWD V6-3.5L (VQ35) (2003)
![background image](/nissan/murano_awd/v6-3.5l_(vq35)/Page-628007.png)
30. Use a scraper to remove all traces of liquid gasket from water pump cover, chain tensioner cover and intake valve timing control covers.
INSPECTION AFTER REMOVAL
Check for cracks and any excessive wear at the roller links of the timing chain. Replace the timing chain as necessary.
INSTALLATION
NOTE: The figure shows the relationship between the mating mark on each timing chain and that on the corresponding sprocket, with the
components installed.
1. Install RH and LH camshaft chain tensioners to cylinder head as follows if removed.