Murano AWD V6-3.5L (VQ35) (2003)
16. Loosen crankshaft pulley bolt. (At this time remove oil pan rear cover plate and set a suitable tool to ring gear so that crankshaft cannot rotate.)
CAUTION: Exercise care not to damage signal plate.
17. Remove crankshaft pulley with a suitable puller.
18. Remove lower oil pan.
19. Loosen bolts in reverse order shown in figure, and remove installation bolts at the front of upper oil pan.
20. Install lower oil pan temporarily.
21. Support the lower oil pan bottom with a transmission jack.
^
Perform following operations with engine front-side supported with jack.