Murano AWD V6-3.5L (VQ35) (2003)
12. Slide the evaporator to passenger side, then remove the intake sensor.
INSTALLATION
Installation is basically the reverse order of removal.
CAUTION:
-
Replace O-rings for A/C piping with new ones. Before installing, apply compressor oil to them.
-
Connection point for female-side piping is thin. So, when inserting male-side piping, take care not to deform female-side piping. Slowly insert in
axial direction.
-
Insert one touch joint connection point securely until it clicks.
-
After piping has been connected, pull male-side piping by hand to check that piping does not come off.