Murano AWD V6-3.5L (VQ35) (2003)
Center Mounted Brake Lamp Bulb: Service and Repair
High-Mounted Stop Lamp
BULB REPLACEMENT
1. Remove cover high-mounted stop lamp on back door inner panel.
2. Disconnect high-mounted stop lamp connector.
3. Remove washer tube from high-mounted stop lamp.
4. Remove nuts and remove high-mounted stop lamp from back door.
High-mounted stop lamp : LED
5. Note the following, and install in the reverse order of removal.
-
Install a new seal packing to the high-mounted stop lamp.
CAUTION: Seal packing cannot be reused.