Murano AWD V6-3.5L (VQ35) (2003)
Tail Lamp: Service and Repair
Removal and Installation
Removal and Installation
REMOVAL
1. Remove rear combination lamp finisher.
2. Remove rear combination lamp mounting bolts.
3. Pull the rear combination lamp towards side of the vehicle and remove from the vehicle.
4. Disconnect rear combination lamp connector.
INSTALLATION
Install in the reverse order of removal. Be careful of the following:
Rear combination lamp mounting bold:
Tightening Torque: 4.5 - 6.4 N.m (0.46 - 0.65 kg-m, 40 - 56 in-lb)