Murano AWD V6-3.5L (VQ35) (2003)
![background image](/nissan/murano_awd/v6-3.5l_(vq35)/Page-412007.png)
5. Lift liquid tank bracket upwards. Remove bracket from protruding part of condenser.
6. Slide liquid tank upward, then remove liquid tank.
INSTALLATION
Install liquid tank, and then install liquid tank bracket on condenser.
CAUTION:
-
Make sure liquid tank bracket is securely installed at protrusion of condenser. (Make sure liquid tank bracket does not move to a position below
center of liquid tank.)
-
Replace O-rings for A/C piping with new ones, then apply compressor oil to it when installing it.
-
When recharging refrigerant, check for leaks.
Bolt mounting the liquid tank bracket (upper side)
Tightening torque : 2.94 - 3.82 Nm (0.30 - 0.38 kg-m, 26 - 33 in-lb)
Bolt mounting the liquid tank bracket (lower side)
Tightening torque : 5.0 - 6.47 Nm (0.51 - 0.65 kg-m, 45 - 57 in-lb)