Murano AWD V6-3.5L (VQ35) (2003)
Engine Control Module: Pinout Values and Diagnostic Parameters
ECM Harness Connector Terminal Layout
ECM Terminals and Reference Value
Preparation
1. ECM is located behind the glove box. For this inspection, remove glove box.
2. Remove ECM harness connector.
3. When disconnecting ECM harness connector, loosen it with levers as far as they will go as shown at right.
4. Connect a break-out box (SST) and Y-cable adapter (SST) between the ECM and ECM harness connector.
-
Use extreme care not to touch 2 pins at one time.
-
Data is for comparison and may not be exact.
ECM Inspection Table
ECM Inspection Table Part 1